We have some software provided for the University for our Windows population. The instructions below will assist on finding and installing the application you need.
Please read all instructions carefully and thoroughly. Installations may vary.
In this document we are using ToonBoom as an example. It may not be the same method for other applications.
1. If you are off campus or on a non UArts network, Run the GlobalProtect VPN first.
Skip to step 2 if you are on campus or connected to the UArts network.
If you do not have the GlobalProtect VPN installed, please visit the following link here.
2. Visit k1000.uarts.edu
5. Find the application you need.
6. Before downloading read the Installation Instructions at the very top. Refer to this as needed.
Please make sure you follow the directions in this area. Not all downloads have the same install methods and failure to follow the directions may lead to incorrect installs and other complications.
7. Unzip and located the BAT file for the application.
8. Right click and run the BAT file as an Administrator.
There may be security prompts that show up when running this file. Please allow this BAT file to run.
9. Follow the instructions and DO NOT close the window until it is completed.
Depending on the application, there may be additional instructions. Please always read carefully and thoroughly with the information presented in the command prompt and the Installation Instruction on the download page.